RS TPMS for BMW E9X 2011+

TPMS for 2011 models!

*** TO FIND OUT WHICH TPMS YOUR BMW USES, PLEASE VISIT THIS WEBSITE, http://www.realoem.com/bmw/ AND ENTER YOUR VEHICLE INFORMATION OR VIN*** and search for the BMW part number (36106790054) under "Wheels" category

Features:
- Fits OE Application, compatible with all factory and most aftermarket wheels
- Adjustable from 20-40 degrees.
- Functions exactly as factory OE sensor.
- One year warranty
- 4 x Tire Pressure Monitor Sensors + 4 x Required Valve Stems

Benefits:
- Save some money in this crazy economic
- Available in singles! Easily replace if one of your factory one stop working
- Tradmark Adjustable Stems from 20 - 40 degree to fit most of the aftermarket wheel angles
- No more swapping TPMS from Summer to Winter set or vice versa
- Lastly save some money again!

This is complete brand new set of 4 Tire Pressure Sensors with valve included from RS Technik. (you save about $150 with RS Technik set over BMW OEM) RS012 RS-012

TPMS pressure sensors for cars using the RS Technik system. The coded 433Mhz signal is automatically picked up by receivers in the wheelarch housing and the system automatically configures. These are replacement sensors for BMW Part# 36106790054.

Available BMW Models:

- 1 series E82/E88 (09/2010 ~ Current)
- 3 series E90/E91/E92/E93 (10/2009 ~ Current) M3 Coupe, M3 Sedan, Mini, E90, E91, E92, E93 10/2009+ and AFTER

-5 series F07 GT (2011 ~ Current)

-5 series F10/F11 (2011 ~ Current)

-7 series F01/F02/F04 (2011 ~ Current)

-X series E70/E71 (2011 ~ Current)

-Z series E89 (2011 ~ Current)

BMW/MINI

Tire Pressure Monitoring Systems and Aftermarket Wheels

A direct tire pressure monitoring systems (TPMS) will be standard equipment on every vehicle sold in the U.S. after September, 2007. The criteria for TPMS standardization is that the vehicle must have only four wheels (no dual-wheeled trucks or motorcycles), and weigh less than 10,000 lbs.

All new MINIs and many older BMWs are equipped with an indirect style TPMS (see TPMS facts below), which doesn't affect wheel or tire replacement. On BMWs equipped with direct TPMS, several different valve sensors have been used. All current BMW valve sensors are produced by RS Technik and sold in two parts: the sensor component and the metal valve.

E92-Lighting has sensors available for every direct system-equipped BMW up to 2007 models. Not all wheels will be compatible with BMW sensors. The size of the sensor shouldn't be a problem for mostwheels, but if the valve hole is in the middle of the wheel's barrel, then the sensor will not fit properly. Wheel manufacturers are aware of the issue and are making most of their wheels TPMS-compatible. We have carefully determined which wheels that are currently available will be compatible with the system installed on your vehicle, and only those fitments are listed on the site